The Aimpoint T2 is the current compact Micro from Aimpoint AB, and in 2018 Aimpoint received a $6.84 million order through the NATO Support and Procurement Agency to supply Micro T-2 sights to the Finnish Defence Forces. This optic has all the hallmarks of high-quality optics ready for military and law enforcement professionals. With the Micro T-2, you will get an optic at home at the range to the battlefield and every place in between.
In this review of the Aimpoint T2, we will take a complete look at what makes this red dot sight the next level in its class. We will cover all of the top features, specifications, and the pros vs. the cons of this optic. Finally, we will provide you with a side by side comparison of Aimpoint Micro T-2 vs. T-1 and finish out with what other shooters have to say about the sight.
Aimpoint T-2 Red Dot Sight Review
The Aimpoint Micro T-2 is a rugged, compact tube-style red dot sight with an 18mm clear aperture and a 2 Minute of Angle (MOA) LED projected red dot reticle. Powered by a single A 3-volt lithium coin cell, 20mm across, and the most common red dot battery (about 210 to 240 mAh). Stocked almost everywhere, so a field swap is easy.Full comparison → Lithium battery, the optic has an expected average battery life of 50,000 hours. The T-2 is suitable for rifle, carbine, shotgun, and even handgun applications for close-range engagements under austere environments.
Aimpoint AB is a recognized leader in red dot sight technology and the red dot sight’s originator 45 years ago. The company is Sweden based and was established in 1975. Aimpoint sights have been in military service since 1997 and continue to be fielded in law enforcement agencies. Several militaries include the U.S. Army, where I first became familiar with them.
Top Features of the Aimpoint T2
Design
The Micro T-2 is a tube-style compact red dot sight machined from high strength aluminum making for an optic rugged yet light, weighing only 3.3 oz.
The sight’s body is coated with a hard-anodized black non-glare finish to protect from scratching and withstand corrosion via occasional contamination by lubricants, cleaner, and oils.
Being a compact red dot sight, the Aimpoint T2 maintains a small form factor with a 2.7 in length x 1.6 in width x 1.4 in height along with a clear aperture diameter of 18mm. The shape and size allow for a sleek, discreet presentation during engagements that enable snag-free rapid target acquisition/observation and situational awareness.
Aimpoint specifies that the optic is submersible to 25 meters; this is consistent with the An optic's Ingress Protection (IP) code from IEC 60529: the first digit rates dust (0 to 6), the second rates water (0 to 8). A digit shown as X was simply not tested.Full comparison → Code of A full IP code meaning dust-tight (6) plus continuous immersion beyond 1 meter to the manufacturer's stated depth and time (8).Full comparison →. You won’t have to worry about water or dust intrusion.
The Aimpoint T-2 incorporates advanced optical lenses that are coated to reduce glare. We noticed how clear these lenses are, unlike some lenses that often have a slightly bluish or green hue.
Another thing to note about the lenses of the T-2 is that the front lens of this optic is tilted, allowing for a crisper reticle dot and no observable forward optical signature from the dot when viewed from the front beyond 10 meters using the NVD brightness setting.
Reticle
The Aimpoint Micro T-2 has a single 2 MOA red dot reticle produced by a red Light-Emitting Diode (LED) at a wavelength of 655nm +/- 10nm. There are 12 reticle intensity settings to ensure adequate brightness to match the various ambient light conditions you may encounter. Settings 1-4 are compatible with Night Vision Devices (NVD), while settings 5-12 are for daytime use.
Adjustments to the brightness levels are accomplished through a single side-mounted rotary-style intensity switch. I feel that the rotary switch provides adequate tactile feedback when making brightness adjustments.
Operation
Powered by a single CR2032 3V lithium coin battery, the Micro T-2 will provide approximately 50,000 hours of battery life when set on the level 6 brightness setting. Aimpoint can achieve such a high battery life through its Advanced Circuit Efficiency Technology (ACET), a proprietary low power consumption diode circuitry system.
This allows you to continuously leave the optic on for up to five years, ensuring that the optic is ready for use at all times. The battery compartment is under the rotary switch, so I prefer to change the battery annually since they are cheap, and it doesn’t require you to remove the optic to do so.
The operation of the Aimpoint T-2 could not be any simpler. To adjust the brightness, simply rotate the side mounted switch to the desired brightness level appropriate for the expected ambient light condition.
Adjusting the windage and elevation is just as straightforward as the reticle brightness. Both the elevation and the windage adjustments are in .5 MOA increments, translating to a .5 inch point of impact movement at 100 yards, or 13 mm point of impact movement at 100 m.
The windage adjustment knob is mounted on the optic’s right side just behind the brightness adjustment rotary switch. The elevation adjustment knob is mounted in the top rear section of the sight. Adjustments are made by removing the protective caps and using the provided adjustment tool or the windage cap to turn the adjustment screw.
Reliability standing
Aimpoint Micro T-2 (2 MOA)
Low confidence based on 8 sources, 5 first-hand.
- Battery
- CR2032: No runtime measured on a T-2. Related units: Ed Friedman's personal Micro T-1 had been on for two years and was as bright as the day he installed it (2017), and The Reptile House left an H-2 running at a medium setting for nearly three years before selling it (2019).
- Warranty details
- Aimpoint US warranty: free from defects in material and workmanship for 10 years from purchase for personal use and 2 years for professional or competition use; limited to the original purchaser and not transferable.
What those tests were
- recoil: pass . Micro T-1, not the T-2: Eric (Gunmart Blog, 2011, a sample sent by Aimpoint) fired just under 1,000 rounds over six range sessions on a DDM4, removing and remounting the sight after every trip, and saw "no loss of zero… ever." He did no torture testing.
- recoil: pass . Micro H-2 sibling, not the T-2: Bob Campbell (K-Var) fired over 200 rounds through a Wilson Combat AR9 wearing his own H-2, with headshots at 100 yards and five shots under one inch from the bench. He does not discuss zero retention.
Aggregated from others' first-hand testing, not our own: this standing deliberately reaches past any one shooter's round count. We surface a sourced reputation tier rather than inventing a score the evidence cannot support.
Full reliability data →Warranty standing
Aimpoint warranty
10-yr housing, 10-yr electronics, non-transferable
- Housing
- 10 yrs
- Electronics
- 10 yrs
- Transferable
- No
- Receipt required
- Yes
- Registration
- No
- Support
- active
Aimpoint sets two warranty periods by use, both counted from the date of purchase: 10 years for personal use and 2 years for professional or competition use, against the same defects in material and workmanship. Its US warranty page defines personal use as normal civilian or recreational activities, and professional or competition use as professional applications (military or law enforcement) or shooting competitions. Its global warranty page defines professional or frequent competition use as daily or highly frequent use in professional activities (military or law enforcement) or under conditions comparable to professional use.
Mounting
The Aimpoint Micro T-2 does not come with a mount. Depending on your desired application, low mount, 1/3 co-witness, or a full co-witness, you will have to purchase a separate mounting base.
My favorite mount for absolute co-witness is the 1.42” center height over rail Scalarworks LEAP (SW0100). And if you’re after a lower third co-witness, try the 1.57” center height over rail Scalarworks LEAP (SW0110).
Details
Included with your purchase:
- Aimpoint Micro T-2 (200180)
- Allen Wrench
- Aimpoint Tool
- User Manual
- CR2032 Battery
- Screws for base
- Rear flip-up lens cover
- Front flip-up lens cover
Aimpoint Micro T-2 vs. T-1
- Refinement of the reticle dot clarity and shape, through improved lens coatings and a slightly canted front lens in the T-2 as opposed to a perpendicular to the line of sight front lens of the Micro T-1.
- Raised turrets to the front of and behind the elevation adjustment screw atop of the T-2 versus the unguarded elevation adjustment screw of the T-1.
- The inclusion of flip-up front and rear covers with the Micro T-2 versus the T-1 bikini style lens covers.
- With the Aimpoint T-2, you get reinforced threaded inserts for mounting the optic to the base versus the Micro T-1 aluminum threads prone to stripping out.
What Testers Reported
Two testers who put the T-2 next to the T-1 preferred the newer sight. Bill Marr (rifleshooter.com, 2014) wrote that the T-2 has better glass, and Ed Friedman (Shooting Illustrated, 2017, on an Aimpoint test sample) saw an increase in sharpness and could identify targets more clearly in poor light. No drop, submersion or round-count test of a T-2 itself was found; the durability and battery evidence on record comes from its T-1 and H-2 relatives.
Pros & Cons
Pros
- One of the most rugged red dot sights on the market: highly shockproof and resistant to extreme conditions
- Five-year battery life under continuous operation using level 6 brightness
- Lightweight with small, sleek design for full situational awareness with both-eyes-open shooting
- Exceptionally clear lenses with no blue or green hue: outstanding viewing experience
- IP68 waterproof rating: submersible to 25 meters
- Tilted front lens reduces forward optical signature on NVD settings
- Ordered for the Finnish Defence Forces through NATO's procurement agency in 2018
Cons
- Premium price point at the upper end of the cost spectrum
- Mount not included: must be purchased separately
- Limited features compared to competitors: simplicity is the trade-off for extreme reliability
Conclusion
The Aimpoint Micro T-2 is a no-nonsense workhorse built for demanding use. None of the reviews we found reports a T-2 failure, and Finland ordered it for its defence forces, though no drop, submersion or round-count test of a T-2 itself has been published; most of the long-term durability evidence comes from the T-1 and H-2.
Alternative Sight Options
If the price on this sight is too high, but you still need a similar reliable option at a lower price, one lower-priced option is the Holosun HS403B, last listed at $205.87 before Holosun discontinued it, so look for a leftover or used unit; for a cheaper tube dot that is still sold new, see the Vortex Crossfire. For a middle of the road alternative with an impressive track record, the Trijicon MRO makes an excellent choice, though Trijicon has discontinued it, so you will be buying a leftover or used unit.