How about a trusted option in reflex sights?
In this case, the Trijicon RMR stands for Rugged Miniature Reflex (RMR).
Read this review of the Trijicon RMR Type 2 3.25 MOA (RM06-C-70067) and see for yourself why this reflex sight is a number one choice and must-have for serious civilian and professional gun owners.
This optic is a top performer from a company with a proven track record in delivering quality optics and sights, some of which are used by the United States military.
In this review, we will bring you the features and specifications of the Trijicon RMR Type 2 adjustable LED 3.25 MOA reflex sight. We will attempt to cover all the information there is on this reflex sight to help you make a well-informed decision highlighting the pros and cons of the Trijicon RMR Type 2.
And while we are at it, we will take a look at what other hunters and shooters think about this Micro Red Dot Sight (MRDS).
Trijicon RMR Review
Trijicon’s RMR Type 2 series has enjoyed the status of a trusted optic for its rugged reliability.
Because of the sight’s reliability, it was considered and selected by the United States Special Operations Command (USSOCOM) for their Handgun Reflex Sight (HRS) contract. You can believe that SOCOM put this sight to the test. You will find that the same reliable durability has been incorporated into the Trijicon RMR Type 2 adjustable LED 3.25 MOA (RM06-C-70067).
Top Features of the Trijicon RMR RM06
Design
The Trijicon RMR is forged from A high-strength aerospace aluminum alloy (yield about 503 MPa / 73 ksi, roughly 1.8x that of 6061-T6) for only a few percent more weight. The go-to for duty and hard-use pistol optics, often forged.Full comparison → aluminum, making the sight lightweight and extremely strong. The optic only weighs 1.2 oz, which is extremely important, especially for handgun applications. The sight has an overall length of 45mm with a width of 28mm and a height of 25mm.
The reflex sight boasts a patented chassis shape that is designed to reduce stress to the lenses by absorbing impact. The optic is built to withstand repeated recoil stress, such as is encountered from slide ride pistols. You will find that it has a low profile without any side protrusions, keeping it snag-free while drawing it from a holster or maneuvering around your tactical gear.
The RMR Type 2 is An optic's Ingress Protection (IP) code from IEC 60529: the first digit rates dust (0 to 6), the second rates water (0 to 8). A digit shown as X was simply not tested.Full comparison → up to 20 meters underwater for 1 hour, achieving an An IEC 60529 rating for continuous immersion deeper than 1 meter, to a depth and time the manufacturer specifies and tests. The X means dust was not separately rated.Full comparison → rating. You will find this standard to be more than sufficient for almost any shooting environment.
Reticle
The Type 2 RM06 has an adjustable LED 3.25 MOA red dot reticle. There are eight illumination settings available in manual mode.
Settings 1 through 8 with setting one being the dimmest and setting eight the brightest. In automatic mode, it has five illumination settings utilizing settings 3 through 7 depending on the current light conditions.
The use of an LED light source ensures an extended battery life, so you are always ready.
Lenses
As you would expect, the sight is fitted with multi-coated lenses. These optical coatings reduce glare and internal light loss as well as evening out light transmission across the viewing surface.
The result of the application of these coatings is exceptional image sharpness, clarity, and contrast. The coatings also provide an anti-reflective surface that reduces the shooter’s signature.
The Trijicon RMR is factory adjusted to be parallax-free at 50 meters. Because of this, it is suggested that you zero your point of impact/point of aim at 50 meters to reduce parallax errors.
With the RMR Type 2, you can achieve both eyes open target acquisition with unlimited eye relief under time-sensitive conditions enabling rapid engagement with your target.
Operation
The Trijicon RMR adjustable LED is turned on by pressing any button on the optic. The sight will wake up in automatic mode. Plus and minus buttons are located on the sides of the sight. By pressing and releasing the plus or minus buttons, you increase or decrease the brightness respectively, this also puts the RMR Type 2 in manual mode.
Press and release both buttons simultaneously for less than 3 seconds to return the sight to automatic mode.
The sight is powered by a single A 3-volt lithium coin cell, 20mm across, and the most common red dot battery (about 210 to 240 mAh). Stocked almost everywhere, so a field swap is easy.Full comparison → lithium coin battery that will provide a 1+ year operating life in the continuous on state under normal conditions. You will know when the battery is running low as the dot will become dimmer and dimmer. To change the battery, you must dismount the red dot sight.
To power the sight off for long-term storage press and hold both buttons simultaneously for 3 seconds.
Mounting
With the Trijicon RMR RM06, you will need to purchase separately the mounting solution that fits your hunting or shooting platform.
Details
Here is what is included:
- Trijicon RMR Type 2 adjustable LED 3.25 MOA reflex sight
- CR2032 lithium coin battery
- Allen wrench
- 2 x mounting screws
- Manual
Other features:
Upgraded electronics designed to withstand the most demanding shooting conditions.
Increased resistance within the windage and elevation adjusters, providing better audible and physical feedback when making adjustments.
The sight will return to automatic mode after 16.5 hours of the last manual setting to ensure readiness at all times.
The RMR Type 2 is compatible with night vision devices.
Trijicon RMR Type 2 vs. Type 1
Those already familiar with the Trijicon RMR series may remember the RMR Type 1 red dot sights. These sights were mainly for rifle and shotgun applications and were not originally designed to take the repeated stress of slide ride pistols.
Shooters who employed the sight primarily with handgun applications found that the electronics would sometimes fail due to the recoil. The primary problem was with the battery contacts failing, which caused the reticle to flicker and sometimes stop working altogether.
The Trijicon RMR Type 2 upgraded the internals increasing the reflex sight’s durability making for an extremely reliable sight.
Customer Feedback
The Trijicon RMR Type 2 reflex sight has a 4/5 stars with over 100 reviews.
What shooters, hunters, and gun enthusiasts liked about this sight:
Construction: This is a rugged reflex sight perfect for handgun applications needing a reliable MRDS.
Reticle: The 3.25 MOA reticle is a perfect size, allowing for rapid acquisition and an unobstructed view of the target through the optic.
Price: You get what you pay for, and if your life depends on it, then the price is not a factor.
Lenses: Crystal clear lenses and a sharp reticle.
Variations
If you prefer a larger reticle, you can get the RMR Type 2 with a 6.5 MOA red dot.
Alternate Options
For an in-depth look at a sight that we believe is an excellent alternative to the RMR, check out our Holosun 507C review.
